22 t antalum electrolytic capacitors hitachi aic inc. tmcp test conditions jis c5101-3-1998 operating temperature range ?5? ~ +125? rated voltage dc2.5 ~ 20v 85? surge voltage dc3.2 ~ 26v 85? derated voltage dc1.6 ~ 13v 125? capacitance 0.1 ~ 33? capacitance tolerance ?0% or 20% paragraph 7.8, 120 hz leakage current paragraph 7.7, in 5 minutes after the rated voltage is applied. tan d paragraph 7.9, 120hz paragraph 7.14 thermal shock failure rate 1% / 1000hrs features rendered even smaller-sized thanks to the accumulated technological knowhow (reduced to about 1/3 the cubic volume of the tmcs type). suitable for high-density packaging essential to audio visual and other equipment downsizing. outline of drawings and dimensions anode indication belf mark l w w h a product symbol : (example) tmc series p case 6.3v 10 f 20% terminal code packing polarity code packing method code (t:carrier tape) capacitance tolerance code capacitance code rated voltage code case size code tmc p 0j 106 m t r f type of series case case size code l ?.2 w ?.2 h max r ?.2 a ?.1 p 2.0 1.25 1.2 0.5 0.9 dimensions (unit : mm) capacitance code rated voltage (v.dc) & 1 1 1 ( 1 1 1 + 1 1 1 1 1 " 1 1 1 1 1 $ 1 % 1 1 1 1 1 1 1 f for ratings not covered the table, consult hitachi aic. standard value and case size p case product (0805) tmcp series (0805 size tantalum chip capacitors) specified initial value ?5 85 125 c/c -12 ~ 0% 0 ~ +10% 0 ~ +12% tan d 0.06 0.10 0.08 0.10 value shown table 0.08 0.12 0.10 0.12 or less 0.10 0.14 0.12 0.14 0.12 0.16 0.14 0.16 0.20 0.24 0.22 0.24 0.30 0.60 0.30 0.40 lc 0.01cv 0.1cv 0.125cv or or or 0.5? or less 5? or less 6.25? or less refer to table standard product table c/c ?0% or less tan d specified initial value or less lc specified initial value or less refer to table standard product table c/c ?% or less tan d specified initial value or less lc specified initial value or less c/c ?0% or less tan d specified initial value or less lc specified initial value or less c/c ?0% or less tan d specified initial value or less lc 125% specified initial value or less c/c ?0% or less tan d specified initial value or less lc specified initial value or less c/c ?0% or less tan d 150% specified initial value or less lc 200% specified initial value or less product specifications paragraph 7.12 solder dip ? ? ? sec. reflow ? ? sec. paragraph 9.5, 40? 90 ~ 95%rh,500hrs leave at -55?, normal temperature, 125?, and normal temperature for 30 min., 3 min., 30 min., and 3 min. repeat this operation 5 times running. 40?, humidity 90 to 95%rh the rated voltage is applied for 500 hours. paragraph 9.10, 85? the rated voltage is applied for 2000 hours. 85?. the rated voltage is applied (through a protective resistor of 1 w /v). surge withstanding voltage temperature characteristics solder heat resistance moisture resistance no load high-temperature load moisture resistance load
rated voltage capacitance tan d leakage current case product name v. dc ? ? code 2.5 15 0.08 0.5 p tmcp0e156 22 0.10 0.6 p tmcp0e226 33 0.20 0.8 p tmcp0e336 41 5 0.08 0.6 p tmcp0g156 22 0.10 0.9 p tmcp0g226 33 0.30 13.2 p tmcp0g336 6.3 4.7 0.08 0.5 p tmcp0j475 6.8 0.08 0.5 p tmcp0j685 10 0.08 0.7 p tmcp0j106 15 0.12 1.9 p tmcp0j156 22 0.30 13.9 p tmcp0j226 10 1.5 0.08 0.5 p tmcp1a335 2.2 0.08 0.5 p tmcp1a475 3.3 0.08 0.5 p tmcp1a475 4.7 0.08 0.5 p tmcp1a475 10 0.20 10.0 p tmcp1a106 16 1.0 0.06 0.5 p tmcp1c105 20 0.1 0.06 0.5 p tmcp1d104 0.15 0.06 0.5 p tmcp1d154 0.22 0.06 0.5 p tmcp1d224 0.33 0.06 0.5 p tmcp1d334 0.47 0.06 0.5 p tmcp1d474 0.68 0.06 0.5 p tmcp1d684 1 0.08 0.5 p tmcp1d105 standard product table - tmcp series simplified code of rated voltage (a : 10v) (example 1) 6.3v1 f a6 anode indication belt mark simplified code of nominal capacitance (a6 : 1 f) (example 2) 10v1 f aa anode indication belt mark simplified code of nominal capacitance (a : 1 f) simplified code of rated voltage (a : 10v) (example 1) 6.3v1 f a6 anode indication belt mark simplified code of nominal capacitance (a6 : 1 f) (example 2) 10v1 f aa simplified code of nominal capacitance (a : 1 f) anode indication belt mark when the capacitance code is the same, use the voltage code for the higher rated voltage. when indicating both rated voltage and nominal capacitance by code, omit the multiplier of the capacitance code. marking indication standard product tables - tmcp series t antalum electrolytic capacitors 23 hitachi aic inc.
|
